The TI-STICKS are made of pure medical grade nickel titanium and will absolutely make the most indestructible steelhead tube fly known to mankind. Period! It really is as simple as that. The material I've obtained will not break or rust or bend, and is considerably lighter than steel. As I demonstrated in that short clip, you can see the snap back power of this material. These sticks will absolutely take a beating and will not bend; it will always realign to center. These will also be great for large saltwater flies. The titanium rod is solid. There is no pass through hole.
TI-STICKS are available by the foot for $6, so you can clip the rod to the length of the fly that you are creating.
TI-STICKS are also available in packs of 6 qty, 2 in. lengths for $8
I hope you enjoy this new product, and I look forward to seeing all your creations.
String leeches are great flies but carring them is a pain with a standard fly box, tangles from the heads swinging were the norm,. With my system insert the hook in the foam put the head under the banding and thats that, your string leeches are in check, simple and effective.
________________________________________________________________
These are are a great substitute for 3/16 tungsten beads. They are a great fit on all the speyco pipes. They will also fit 3/32 metal and plastic tubes
• This styrene butadiene copolymer box has excellent impact properties.
• Also maintains scratch resistance and it's transparent qualities.
________________________________________________________________
u
____________________________________________________________
• Makes a great mandril backer for stiffing plastic tubing on the vice.
• Very Strong and affordable.
• Also can be use as a fly shank , adds a good amount of weight to the fly.
• Wire Diameter 1/16 .063" about the same diameter of a heavy salmon hook.
• Easy to manage 2 foot Cut Lengths, cut directly on the vice for making custom length flies.
• Comes Straight ( NOT COILED) and Spring Tempered.
• Makes a nice small profile body .
• Most standard beads and cones slide right on.
• 6" of silicone junction tubing included.
_______________________________________________________________
PTFE tubing has the lowest friction coefficient of any tubing, and is semi-translucent, remains flexible at extreme temperatures and in harsh fishing environments. Ends do not burn to a mushroom must be glued or melted into host tubing.
Fits all 1/8 plastic tubing that I offer.
Specifications:
*Material PTFE
*Temperature range is -400 to 500°F (-240 to 260°C); melts at 620°F (327°C).
*Tensile strength is 2500 to 4000 psi.
*ID 0.032"
*OD 0.056"
*Wall thickness 0.012"
________________________________________________________________
These are are a great substitute for 3/16 tungsten beads. They are a great fit on all the speyco pipes. They will also fit 3/32 metal and plastic tubes
* Oval shaped
Looking for a heavy duty affordable way to tie string leeches? This is the system.
________________________________________________________________
• Is made of Styrene Butadiene Copolymer
________________________________________________________________
• Makes a great mandril backer for stiffing plastic tubing on the vice.
• Very Strong and affordable.
• Also can be use as a fly shank , adds a good amount of weight to the fly.
• Wire Diameter 1/16 .063" about the same diameter of a heavy salmon hook.
• Easy to manage 2 foot Cut Lengths, cut directly on the vice for making custom length flies.
• Comes Straight ( NOT COILED) and Spring Tempered.
• Makes a nice small profile body .
• Most standard beads and cones slide right on.
• 6" of silicone junction tubing included.
_______________________________________________________________
PTFE tubing has the lowest friction coefficient of any tubing, and is semi-translucent, remains flexible at extreme temperatures and in harsh fishing environments. Ends do not burn to a mushroom must be glued or melted into host tubing.
Fits all 1/8 plastic tubing that I offer.
Specifications:
*Material PTFE
*Temperature range is -400 to 500°F (-240 to 260°C); melts at 620°F (327°C).
*Tensile strength is 2500 to 4000 psi.
*ID 0.032"
*OD 0.056"
*Wall thickness 0.012"
